Port Digital Output Not Changing Properly

Hi,

I'm using a 18F4550 PIC code that's running on PBP2.50. I'm pulling my hair out trying to figure out why this code won't work. :confused:

Code:

---

DUMMYVAR VAR BYTE

TRISB = %00000000        'SET ALL B PORTS AS OUTPUTS
ADCON1 = %00001111    'SET ALL PORTS TO DIGITAL

MAIN:

PORTA.0 = 1
PORTA.1 = 1

DO SOME STUFF......

GOTO MAIN

---

PORTA.0 stays low and never changes to high. However, if I do the following, then the code works and I get both ports high.

Code:

---

DUMMYVAR VAR BYTE

TRISB = %00000000        'SET ALL B PORTS AS OUTPUTS
ADCON1 = %00001111    'SET ALL PORTS TO DIGITAL

MAIN:

DUMMYVAR = 3
PORTA.0 = DUMMYVAR.0 : PORTA.1 = DUMMYVAR.1

DO SOME STUFF......

GOTO MAIN

---

So, why does the second code works and the first one doesn't? Do you need a pause or delay when changing individual port settings in the same port bank? Does the commands HIGH and LOW resolve this issue? :confused:

Thanks,

Robert

classic RMW read modify write
watch this
http://www.microchip.com/webinars.mi...cName=en556253
click on
View streaming media version:

Richard, wow I wasn't aware of this issue. Check out the following article. It explains in detail exactly what happened in my code.

https://download.mikroe.com/document...c/help/rmw.htm

Also, is it possible to use LATCH instead or PORTx.x in PBP? How would you use the LATCH register?

yes it's not the most thrilling video but it does explain the issue in easy to understand terms.

Quote:

---

is it possible to use LATCH instead or PORTx.x in PBP?

---

pretty easy for chips with LAT regs

in your case
LATA.0 =1
LATA.1 =1

note LAT(X) cannot be used with compound commands THAT auto set TRIS regs like SERIN,I2CIN,TOGGLE etc

Thanks Richard. That helps a lot.