Unable to pass a variable to LCDOUT without getting compile errors

I'm having trouble getting LCDOUT to accept a variable. Currently if I type in actual text it'll work fine and display, on the other hand if I feed it a variable it'll refuse to compile.

Code:

---

'****************************************************************
'*  Name    : UNTITLED.BAS                                      *
'*  Author  : [select VIEW...EDITOR OPTIONS]                    *
'*  Notice  : Copyright (c) 2009 [select VIEW...EDITOR OPTIONS] *
'*          : All Rights Reserved                              *
'*  Date    : 12/22/2009                                        *
'*  Version : 1.0                                              *
'*  Notes  :                                                  *
'*          :                                                  *
'****************************************************************
define OSC 20

DEFINE LCD_DREG PORTC
DEFINE LCD_DBIT 8
DEFINE LCD_RSREG PORTA
DEFINE LCD_RSBIT 4
DEFINE LCD_EREG PORTB
DEFINE LCD_EBIT 5
DEFINE LCD_RWREG PORTB
DEFINE LCD_RWBIT 4
var h as int
var m as int
var s as int 
ADCON1 = %00000000
ADCON0 = %00000001

h = 0
m = 0
s = 0
Lcdprint:
lcdout $FE, $80, h        'this is where I get compile errors.
lcdout $FE, $80, ":"
lcdout $FE, $80, m        'this is where I get compile errors.
lcdout $FE, $80, ":"
lcdout $FE, $80, s        'this is where I get compile errors.
pause 1000
s = s + 1
    if (s = 60)
    then
    m = m + 1
    s = 0
    end if
   
    if (m = 60)
    then
    h = h + 1
    m = 0
    end if
   
    if (h = 25)
    then
    h = 0
    end if
goto Lcdprint

---

Your variable declarations are unfamiliar to me...

Code:

---

var h as int
var m as int
var s as int

---

Try:

Code:

---

h  var  byte
m  var  byte
s  var  byte

---

steve

OK it works now :)