Difficult To Get The Serial Interface GSM Phone
Hi all,
The use of GSM phone as the communication module via SMS is the successful one. I have use this method to collect the data from the remote site.
Discussion here are more on interfacing the pic with the serial GSM phone. But I think it is difficult to get the serial interface GSM phone because the USB becomes the standard.
Any idea to use the PIC as the host usb that can connect to the USB port.
read incomming msg (SMS) and send to VB6
hello, every one..
now i success send sms using pic 16f84a and nokia 3310.. i use pic to push hp button...
My next problem is to read incomming msg (SMS) and send the data to VB6 and MS access .. i use Sony Erricsson T610. i want build database.. for the system i need use pic or i can directly send the msg to VB..
can someone help me..
i need your help..
---> i need use pic or not.
---> i want know how to send msg data to VB and MS Access.
---> want now how to build database and link to MS access.
thank for help..
´Problem with NOKIA 5120i
Quote:
Originally Posted by kasamiko
I've been using a Nokia 6210 and has a working SMS Controller FULLY working with 4 output to drive a relay and 4 input for sensors..
Also capable of sending SMS messages to the Master phone.
Current usage:
Anti carnapping for vehicles..will send SMS to master phone when any of the 4 sensors will be activated. the owner of the car will simply send simple command to turn off the vehicle engine, turn on the light and horn.
Future plan:
I will be adding a VOICE Module so the carnap vehicles can scream " I'M BEING CARNAPPED!" literally..
Regards
Hi Kasamiko
I´ve been trying with a 5120i TDMA phone but nothing!. The pinout of this cellphone says that the pin 4 is Analog ground, so i cant take 2,8V from there. Can u help me?.
thanks
nokia N30 GSM modem with pic16f873
hello all...i need ur help about my project. i just finished read and study previous post but currently still hard to understand. well my project was simple..i using 3 capacitive sensor at 3 level..when it detect any diturbance let say when sensor 1 detect it will send input to pic16f873 and pic will send a text msg using nokia modem N30 to a specific phone number. i understand well about pdu how to encode letter.other sensor all do the same. i using max232 which connected at rx and tx pins.well my problem here i'm cant write specific program to send sms..for those want help..ur help is very appreciated.