mmm thats a pain , yes running the ver of PBP 3.07, with mplab at 8.90
has to be a way to solve this , it really is making me think that its cos port F and G are not part of bank0
Well bummer, it appears Windows 7 can't run ICprog :(
It has a free 16F disassembler, although outdated, it should still translate opcodes that it understands.
So I bit the bullet and had a look...
ok now I get it, that makes so much more sense now. thanks so much.
Thank you Henrik.
It makes more sense to me now.
The only way to increase the frequency (on this chip) is to derive the CPU clock from the 96MHz PLL by setting the OSC CONFIG to PLL mode. For this to work you must ensure that the x-tal...
With 16MHz main clock there are three different prescaler ratios all giving you 250kHz but different number of bits of resolution.
If you set prescaler to 1:2 and load PR2 with 3 then you'll...
ok I think I got that part now as it relates to the USB section, what about if your not messing with USB at all though and you want to run your chip at a higher frequency than the crystal your using,...
I am using the setup from post #43 and I need a clarification on how the duty cycle setting works.
If I understood the data sheet correctly for a 16 MHz main clock and an output...
Absolutely correct, Henrik and a nice clear explanation - at least that's how it seems to work in the projects I've done. The PLL does a fixed multiply by 24. PLL's can distort the shape of the...
nice job and thanks for posting. Snuff28 and others, I am sure will be happy!