the correct syntax and available config word (fuse) settings are available in the pbp3 device_reference folder
Thanks and I did look through some of those threads however I'm still curious as to how the transmitter can control the rotation angle of the servo? Basically what I'm trying to do is use the servo...
Thank you very much in advance for your kind and quick supporting and valuable answer.
One more question please: in page 23 of 18F4520 datasheet, "2.1 oscillator types, 8th...
Settings depend on your hardware and software requirements.
E.g.: Do you have internal or extrernal Vref for the ADC? If it is internal and you want the Vref to be at Vdd and ground span,...
Now that is one cool chip.
16bit PWM with a boatload of modes and complementary outputs, 12bit ADC with differential inputs, 8bit DAC, 2 opamps, 4 comparators + the all the usuall stuff - and IOC on...
This is my very first attempt at using the PIC's A/D.
I think that ADCON0 should be 000100?1 as I am not sure what "GO/DONE" should be set at.
ADCON2 looks like it should be 11101010...
There were about 30 matches when I posted, SO. . . IN THE SEARCH BOX type servo and click the little spyglass icon. It Works.
And thanks Amoque for the link, that could be very useful!
. . . and DO avail youself of the forum search feature, I got from using just the word servo :http://www.picbasic.co.uk/forum/search.php?searchid=1323450
Have you looked at the 16F1786, it has a 16bit PWM that can run at 64MHz