actually I had idea to put few passive component for making one-shout for short period and one shut for longer period
after that i timed mssp module to average carrier frequency (positive +...
Thank you for all suggestions of code examples....
Am away from the issues till next week.... Hot Sticky Queen Anne Blast furnace in Scunthorpe UK
Will try them and update when I get...
in your pbp 3 directory you should have a folder called DEVICE_REFERENCE
have a look in there for a pic18f1220.info file , all the possible config are listed there
IN A FORMAT like this
Hi, I have now installed MPLABX , PBP3 and MCSX. Now I get [ASM ERROR] 18F1220 NOVA BX.ASM (30) : Symbol not previously defined (_INTIO2_OSC_1H) .
I've tried a lot of permutations and found that...
two osc configs will confuse things try , also note the indentation
asm or it could be #config
__CONFIG _CONFIG1H, _INTIO2_OSC_1H
__CONFIG _CONFIG2H, _WDT_OFF_2H & _WDTPS_512_2H...
Hi Richard, my P18F1220.inc does not look anything like that.
I tried your config suggestion with slight mod ( see below) but it still does not work. I also tried with a copy of the .inc from...
Hi Richard, I'm using PBP 2.6. Not sure if my MPASM shipped with it.
I tried using the on board EEPROM by using DATA and READ.
DATA "This is a string",0
but it stores only alternate characters. I was surprised it worked at all but the alternate characters? There...
You are welcome. More is on the way as I am now investigating embedded strings.
the pbp 2.6 inc file for an 18f1220 looks like this
i'm guessing your config should look like this , you need to check the config word for each setting
I you version is older then , I can't...