Yes, that's exactly what it is. The reason for the results have been covered in that thread but not a way to end up with a correct pressure reading - which is still kind of hit and miss since we need...
this is what I mean
'* Notes : For a 18F1320 and 54AL07H2210 *
was it not?
that makes it a "54A L07H2210" not what was posted , its best to be sure
steve can you read the characteristics in the data sheet ,that what comes out garbled for me
PDF works for me.
The sensor is a 0.07 psi low voltage range with output from 0.5-4.5V
Is this not a repeat of the left and right output justification as on the previous thread in Richard's link.
7040 left justified is 110 right justified using Henrik's 4.88mV then
ditto for the pdf
do we have a 54A L07H2210 or a 54ALL07H2210 or a 54AL007H2210 or a 54A 007H2210 ?
they are all different animals and the 54ALxxx are 3.3v devices
Yeah, deja vu indeed....
* The resolution of the ADC is 10 bits.
* It does not return a reading directly in Volts.
* Basically it takes the difference between Vref+ and VRef- and divides...
its just like de ja vou again
Sorry guys. The PDF was too large (22 pages as it had all the devices in the series) so to upload so I had to make it smaller! Yes it is a 0.5 - 4.5v type ratiometric device. My A/D is showing a...