thanks for your guide,
YES i try & _DEBUG_OFF_4L
OSCCON = $72 (OR $70)
OSCTUNE = $40
PROBLEM PERSIS (slow)
i will see the inc directory of mpas
is it effected by the hc595?
You could cheat by using the ASM sleep directive thus.
See section 14.8.1 (Wake-up from sleep) in the datasheet to understand why you may...
Wake up once per second, check the time, if not alarm time go back to sleep.
The time you are awake is so small, you are still asleep well over 99% of the time.
a search with "rn-171 " gets a few hits
interestingly there is a PLLCFG = ON in the pbp3 device reference config options
look like a _PLLCFG_ON_1H is what you need
Somebody alread used the RN171 wifi module with PBP?
I am working with this module but using a C code for while. I would like of to use basic to config it. I will apreciate some example...
try a __CONFIG _CONFIG4L, _DEBUG_OFF in your configs
as henrik wrote yesterday in a similar post the config option's syntax can be found in the pic18f26k20.inc file in your relevant version...
THANSKS alot for your help.
yes, i try
OSCCON = $72,
OSCTUNE = $40
the problem still persises.
portb.6 lost power. but it runs faster ...
This could help.
OSCCON 6:4 need setting for 16 MHZ which is $70, which is what you have.
OSCTUNE 6 needs setting to connect internal oscillator to 4xPLL $40, which you have.
interesting i did not know that on the data sheet , or missed its real meaning ,