Hi Chris,
Can't help with the command line interface to the COM-port, never seen that before. Doing serial coms in VB.net using the supplied serial port object is quite easy though. Just beware that...
Hi,
There are a ton of serial port monitor/sniffer software around but they are usually aimed at sniffing communication going into and out of the PC on which the port monitor is running. If you're...
I have done some vibratin sensors using a old headphone speaker with a small ball point pen spring superglued to the cone , I have tried perpendicular and parallel, #2 works better, but I had to use...
thanks, i will be using VB.net to build the interface program, but I was wondering just to test it out.. I remember back in the days of DOS, you could do a command like
Suggestions please for a serial monitor that can help me debug a project running at 562k5 baud (no it's not a typo 562,500 baud) with mixed parity.
I have an 18F26K22 communicating most of the time,...
Hi Chris,
Yes, now I'm on a "better" network so I took a look at the EBAY-link.
When you plug that cable into the PC and install the device driver it'll appear as another COM-port in Windows. You...
Menu
Re: Rentron Encoder
If you refer to CIP-8 chip, as the data sheet indicates, it work from 3 to 5.5 volts. So, yes, 3.7 is fine.
Ioannis Today, 08:08Now regarding the transmitter, you can find modules that work from 1.8 up to 5.5 volts....