ICC Cricket World Cup 2015 Live Stream
I am having a very strange problem with the Microchip MCP23S08.
It seems no matter what I do, bit #6, GP6 is ALWAYS an input.
I send 0 to the IODIR register to make all 8 bits to be outputs.
Excellent write ups Kudos.My web-site ... antalya escort
The DIV32 approach worked perfectly - thank you.
It shouldn't have any effect. DT-INTS saves the system variables when entering the ISR so even if an interrupt happens in between the multiplication and the division AND the ISR happens to use the...
I knew there had to be a simple way of doing this, I just couldn't figure it out on my own - thank you!
Will the DIV32 command be affected if I am using DT-Interrupts? What happens is...
One possible solution
Dummy VAR WORD
Dummy = Red * Pot4
ScaledRed = DIV32 1024
Dummy = Green * Pot4
ScaledGreen = DIV32 1024
you might get a better result using pot 4 to control a pwm signal that is fed to a common control element driving all the leds (10 bit pwm is no too difficult either)
I need some assistance with PBP3 integer arithmetic.
I am working on an RGB LED application where the intensity of each of the RGB LED's is PWM controlled.
The PWM will be controlled by...
Yes F2 and correction the new version will be 3.0