Much of my serial coms is done via 56K baud which I think requires a 16bit baud rate generator of the PIC's EUSART baud rate generator to access accurately. To access that functionality of the EUSART...
It would be easier to ask the programmer that originally wrote that program to come here and ask for help in the conversion.
Probably be easier to scratch make PBP to do what that file does, or modify it in assy if that's the goal, it would start out with a good understanding of what the code is to do . . .
Are you aware that may not be possible?
It is possible to convert PBP to assembler in every case because PBP does that,
but it is not necessarily possible to do the reverse no matter who you are.
OK so let me get this strait.
If I have a 4550 chip with a 4mhz crystal attached, If I set PLL to divide by 5, then I would need to set DEFINE OSC 20 ?
Folloing the red arrows in the previous...
not sure if a simulator show this to be working for this chip by chance ?
i looking for some one that can write pbp bas from assembly file.
i will pay for that job
the device is pic16f648a
my email firstname.lastname@example.org
yep thought it may have been the lcd option causing this , but i can read the ports directly so see if they are 1 or 0 also the lcd option is output segments , the ports are configured as inputs ,...
when the PIC microcontroller can operate from a power supply voltage in the range 2 to 6V. The supply voltage in digital in digital electronic circuits is +5v and this is the voltage with which the...
Respectfully, that's simply wrong. Every different instruction uses a slightly different amount of current. Those current changes result in noise. Put a cap across the zener to resolve it. And if...