You screen shot shows 300 baud, that is why I gave the example that I did.
Now I notice you code a schematic showing 2400 baud.....
Ok, here is the result in a program.
I’ve yet to reverse the direction of the existing effects which I would like to do.
Actually, according to the product selector on Microchips website only 18 out of around 375 models (which are in production) is missing an internal oscillator of one type or another. They are:
I must admit I'm surprised that it doesn't have a built in oscillator. Thought that all pics had that ??
Yes rather a drag :D I had the character map from a data sheet printed,
and hand drew them all into an online custom character generator to get the byte values for each line.
I didn’t bother with...
It must have been a drag to create the character map.
I assume you used the custom character feature of the controller?
I am glad that the suggestions here were able to get your problem resolved and you are on your way to successful
PBP PIC programming.
This is an excellent support forum with many...
That would explain it. I’d expect the clear screen to take more time too, but I’m overwriting everything instead.
So it seems fastest to jump from 0x80 to 0xC0 in a loop for a two line display....
Hello dear friends,
Here by I would like to express my special gratitude to you guys, especially to TabaSoft
It was exactly the case that you have mentioned. And very good to say I’ve succeed...
according to my lcd data sheet the 0x02 does more than home the cursor , it says it also returns a shifted display back to original pos (execute time 40uS-1.64mS)
seems its best to avoid it if...