Here is the link to the schematic.
Thatís what I mean, Port D is only eight bit port, but there are ten LEDs in the bargraph.
Would you mind telling me what pins the bargraph is connected?
I can Google pictures of the board, but...
The Lab X1 has the LCD and LED bargraph sharing port D.
Sorry, where is the 10 segment LEDs connected to?
See, I read it as you have to read the port AFTER it wakes up so that you clear the mismatch that caused the interrupt.
I'm gonna have to go read that again......
Not me, I don't know if you have this but I did find this page on google:
Can you help me for 8+8 IOs controlled via sms?
I have building a prototype of the project using TC35 modem. It works very well but when power-off the system and after power-on, it not...
After almost 10 years of inactivity I'm back and with pleasure I see that the forum is still alive.
I do not even remember my old nick, I will search if some my old posts are still...
I wrote a little routine for putting PIC18F47J13 to Sleep and Waking Up from a key press. Works fine. Interested in the need to read PortB before @ Sleep? Reading various articles, I think...
What do you mean? I'm displaying on the LCD.