
I don't see where you are setting the UCFG register. You can select low-speed, see the data sheet and search for UCFG.
cc1984 Today, 18:20
We are looking for a pick & place machine that supports 540mm x 540mm pcb size.
If anyone knows a company that makes such machine, please post its information.
The paddle wheel I used is completely sealed and, after finding the right spot for it, all you have to do is run the three wire cable inside. There will be only one time calibration required...
NickMu Today, 16:58
Well, I dusted off the assembly dust on my brain (6989) (I think) and converted to pbp. The display is still blank and off, but the internal switches work so I think I have it connected correctly. ...
cc1984 Today, 16:20
with 12mhz crystal USB work 100%
but i need work with 8Mzh low speed
can i help ?
'***************************************************************************
'* Name : BasicUSB.pbp...
Neither - as has been pointed out numerous times.
rmteo Today, 15:40
Hello Art and all,
I downloaded the last 144_LED_V3.zip and I found some diferences in the schematics.
In 144LEDGAME-Schematic.pdf the keys (UP/DOW/LEFT/RIGHT) is wired by resistors to ground...
It must be getting towards the end of the semester. This has got to be a school project and someone partied too long and hard to get it done on time.
We don't do C here. That's why it's called...

Re: Underwater speed?
I agree the paddle wheel is a good, simple idea. But I don't think the paddle wheel by itself can tell you the speed of the boat. If I remember my dynamics class, the paddle wheel will tell you the...
languer Today, 20:18