if you need more help you will get a better result by providing the forum with your pbp version , the chip you are using and the actual code (in code tags) you have tried
I found something interesting to read,about the config
Are you sure you can see how it works?
IF ("C" = buf(9)) and ("9" = buf(8))THEN loc1
IF ("C" = buf(9)) THEN
IF ("9" = buf(8)) THEN
No, there's no PIC on any Arduino but there are (a boatload of) ATMEL chips on Great Cow Basics list of suported chips.
So, apparently Great Cow BASIC can be used with the Arduinos but to...
Great Cow BASIC is an open-source BASIC compiler for Microchip PIC microcontrollers,
It's compiles for most 10/12/16/18 series PIC controllers.
But there are no PIC MCU in the Arduino MCU list....
as has been discussed thousands of times osc must be in upper case ( OSC) and only tells the compiler what osc frequency to base its timing calculations on.
are config word (sometimes...
Yes,I read it,it do have some example,but what all those word means?
CONFIG XINST = OFF
CONFIG PLLDIV = 5
CONFIG WDTPS = 512
CONFIG CPUDIV = OSC1
This is part of the example,what is all those...
Now Then Steve...
Did it a lazy way.... But hey it works now !!!
SERIN2 portb.1,84, [WAIT($02), STR buf\10] ' Read RFID
Just got Tiny Bootloader to work with my X-bee network. Changed the .asm file to look like this so it runs at 9600 baud @4MHz
LIST P=18F1320 ; change also:...
Food for thought... I got to get kit ready for tomorrow...Off to Newcastle .. change from Scunny.
Queen Anne looking like November turn on.... Bonfire Night !!!
Thanks for help