• lester

    Article Preview

    The Amicus GPS shield contains a multi channel GPS receiver, as well as a 16k byte (128 kbit) serial (I2C) eeprom, and a 3 Volt, 12mm battery socket in order to maintain the receiver's built-in RTC (Real Time Clock).
    ...
    Published on - 30th August 2011 04:03

    Comprehensive documentation and a helpful and friendly support environment, make using Amicus18 an easy and enjoyable ...
    Article Preview

    The entry level shield is labelled The Companion Shield. This is a PCB laid out in the pattern of a solderless breadboard. The holes are single sided, which means that components can easily be removed using solder mop braid, or a solder vacuum tool, if a mistake is made, or components need to be re-used.

    The (PBP3) Companion Shield Manual iCan be downloaded from here

    See the Companion Shield in our on-line shop

    ...

    Amicus is a multifunction development system inspired by the popular Arduino board, however, the Amicus board uses a Microchip PIC microcontroller instead of an Atmel AVRtm type.

    Comprehensive documentation and a helpful and friendly support environment, make using Amicus18 an easy and enjoyable experience for beginners and seasoned programmers.

    Forum Moderator Mackrakit (Dave) very kindly ported the Proton BASIC Compiler code over to PBP3 and modified the original AMicus18 docuemts for PBP3 users.

    ...
    Article Preview

    Amicus18 is an embedded system platform based on a simple open hardware design for a single-board microcontroller, with embedded I/O support and a standard programming language. A great Partner for PBP3 and Perfect for the PBP3 Experimenter.


    ...
    Article Preview

    When installed PBP3 will operate in trial mode for 15 days, we recommend that you TRY PBP3 BEFORE you buy PBP3. Be sure that you are happy with the product and the facilities it offers

    After purchasing your PBP3 license, the product may be activated by entering the activation key as prompted by the application, this process should be carried out whilst your host machine has access to the internet. Activation requires that the machine can contact the melabs activation service.
    ...

    PICBASIC PRO Electronic Dice project for the PIC10F202 or PIC10F206. Written by Melanie Newman

    ...
    Page 1 of 2 12 LastLast