Another thing that could be causing problems is that SEROUT2/SERIN2 are software bit-banged (no hdw UART involved),
so device B must be sitting waiting at the SERIN2 for the first start bit before...
Are these PICs on the same PCB or on each end of a long cable?
Cable (well PCB traces too of course) has capacitance, with a 10k resistor you're forming quite an RC-filter (relatively speaking)...
Yes it could be a problem. Try with no resistor and see if the problem is in your code or just the lack of power on the link. Then try max 1K resistor.
Hi, I have two devices communicating with SERIN2/SEROUT2. Device A, a PIC18F4550, sends data to device B a PIC16F19197. I'm receiving the data at device B using SERIN2, but like 1 out of 5 times I...
this can not work as you set the qualifier to 0x0d as per my example , ProgIDRx will always be 0x0d
untill you change it , serin will never change it
...
Menu
Re: SERIN2 Receiving Wrong Data
Another thing that could be causing problems is that SEROUT2/SERIN2 are software bit-banged (no hdw UART involved),
tumbleweed Today, 13:34so device B must be sitting waiting at the SERIN2 for the first start bit before...