First post your code here...
Clkout is FOSC/4, so OSC is set to 8MHz, you should get 2MHz on pin.
I have been testing a program for a 12F683 to drive an RC servo. The compiler is Picbasic Pro ver 3 and both QL 200 and IDE 2 programmers give the same result. The programmed chip does nothing. ...MillicentBear Today, 02:03
For the #1, I've read 16F1829 datasheet, and it says that it can emulate 555 timer in hardware, so I guess, it might be possible to do what I want.
For the #2, I see this In the...
1) For a short answer I would say no, not really but a standard timer interrupt can easily be used (which then obviously uses a combination of hardware (the timer) and software (the interrupt service...HenrikOlsson - 19th February 2017, 11:39
Two more interrupt/timer/pwm questions, if you don't mind.
1. Is it possible to configure timer to enable-disable hpwm generator at predefined time amounts? say, 1 second on, 1 second off. So all...
Are talking about re-attaching tables? Don't bother your users with that. I can show you how to do it programmatically. FYI, if you own Office Developper edition you can distribute the Access Runtime...MichelJasmin - 17th February 2017, 18:19
If the application allows you can disable interrupts while
those commands are running, and re-Enable straight after.
No good for some applications such as a real time counter
but in others you...
| PICBASIC PRO™ Compiler 3.0 PBP is a BASIC programming language for Microchip's PIC microcontrollers.
Version 3 is a major evolution of this popular product, making it even more capable, stable, and reliable. All the years of development culminate here, with many new capabilities and improvements. Come see why thousands of engineers, educators and hobbyists have depended on PBP for more than a decade.
Software activation keys are delivered electronically after purchase.
15 Day Trial Before Activation Key is Required
If installed without an activation code, the software will be fully functional for 15 days.
Read about Product Activation