MEL PICBASIC Forum - Add New Section

• ### Recent Forum Posts

#### Re: Watchdog timer not working as expected

This is not correct. The original code is fine.

The keyword DEFINE is a PBP keyword so it's NOT case sensitive, can be define, DEFINE, DeFiNE, DEFine, however you want to write it. The thing that...

HenrikOlsson Today, 08:54

#### Re: Newbie Manchester Coding question

Looks straight forward, esp if you use a chip with gate control and can set a timer to count in 1uS increments

what did you have in mind ?

richard Today, 08:05

#### Re: Watchdog timer not working as expected

From the PB3 manual

2.15 Case Sensitivity
PBP is not case sensitive, but Assembly Language is. This means that there are
situations where case matters

2.15.1 DEFINEs
Since many of the...

aerostar Today, 06:30

#### Re: Newbie Manchester Coding question

Apologies, I was beginning to think nobody was responding so it's been couple of days since I've checked.

They're old temperature sensors I picked up cheap and I was hoping to utilise for a...

rocket_troy Today, 06:08

#### Re: Complex math on 16F series?

Check this one first:

and then check this one second:
http://dt.picbasic.co.uk/CODEX/N-BitMath

or reverse the order.

sayzer Yesterday, 22:10

#### Complex math on 16F series?

d = 1 / ((x1 - x2) * (x1 - x3) * (x2 - x3));
a = d * (x1 * (y3 - y2) + x2 * (y1 - y3) + x3 * (y2 - y1));
b = d * (x1 * x1 * (y2 - y3) + x2 * x2 * (y3 - y1) + x3 * x3 * (y1 - y2));
c = d * (x1 * x2...

CuriousOne Yesterday, 21:17

#### Re: Help with Using the Catalex MP3 Player

Nice one Brek! Forgot there was that second switch.

Ioannis

Ioannis Yesterday, 19:44

#### Re: Help with Using the Catalex MP3 Player

There’s another switch contact on the rotary dial to tell you the dial is in the home position doing nothing.
The dial switch does nothing while the dial is being rotated clockwise by the finger so...

Art Yesterday, 17:43

#### Re: Watchdog timer not working as expected

If you haven’t tied your MCLR pin high or disabled it, you could get an MCLR reset any time.
Same with a brownout reset. I haven’t checked this hex configuration values you gave (nobody is going to...

Art Yesterday, 17:33

#### Re: Si4702 FM Radio chip

My code in here is probably more sensible for PBP. In code examples is dirty to get most out of 16F628a.

Up to you, but that DT code link above is an otherwise lost original I think (which I...

Art Yesterday, 17:06
• # Other Example Code

### NRF24L01+ CODE Example for 1 to 1 data communication using same code on 2 PICs.

by Published on - 10th September 2018 09:49

'************************************************* ***************
; This code allows for data communication between ...

### NCO Calculator

by

I'm building a project that requires calculating numerous frequencies with the Numerically Controlled Oscillator ...

### Battery Operations - Measure Battery Voltage Using FVR, No Pin Used.

by Published on - 18th June 2017 14:14

This code allows us to use FVR feature of a PIC to measure Vdd voltage of a PIC, without using any external components or ...

### MCP23S17 - Three different approaches - ShiftIn/ShiftOut / MSSP+PBP / MSSP+ASM

by Published on - 4th February 2012 20:53  Number of Views: 3416

Hi everyone;

In a project that came up was necessary to use the MCP23S17. After searching the forum, i did
...

### Quick and dirty candle effect with PIC12F675

by Published on - 1st September 2011 03:30

For best results use a clear amber LED, you can embbed the LED using a tube as cast and pouring molten parafin...
...

### Dice Project

PICBASIC PRO Electronic Dice project for the PIC10F202 or PIC10F206. Written by Melanie Newman

...

### monitor Vdd on a 12F675

PICBASIC PRO program that allows you to monitor Vdd on a 12F675 using only one pin for external reference. This allows ...