MEL PICBASIC Forum - Add New Section

• ### Recent Forum Posts

#### Re: Newbie Manchester Coding question

Looks straight forward, esp if you use a chip with gate control and can set a timer to count in 1uS increments

what did you have in mind ?

richard Today, 08:05

#### Re: Watchdog timer not working as expected

From the PB3 manual

2.15 Case Sensitivity
PBP is not case sensitive, but Assembly Language is. This means that there are
situations where case matters

2.15.1 DEFINEs
Since many of the...

aerostar Today, 06:30

#### Re: Newbie Manchester Coding question

Apologies, I was beginning to think nobody was responding so it's been couple of days since I've checked.

They're old temperature sensors I picked up cheap and I was hoping to utilise for a...

rocket_troy Today, 06:08

#### Re: Complex math on 16F series?

Check this one first:

and then check this one second:
http://dt.picbasic.co.uk/CODEX/N-BitMath

or reverse the order.

sayzer Yesterday, 22:10

#### Complex math on 16F series?

d = 1 / ((x1 - x2) * (x1 - x3) * (x2 - x3));
a = d * (x1 * (y3 - y2) + x2 * (y1 - y3) + x3 * (y2 - y1));
b = d * (x1 * x1 * (y2 - y3) + x2 * x2 * (y3 - y1) + x3 * x3 * (y1 - y2));
c = d * (x1 * x2...

CuriousOne Yesterday, 21:17

#### Re: Help with Using the Catalex MP3 Player

Nice one Brek! Forgot there was that second switch.

Ioannis

Ioannis Yesterday, 19:44

#### Re: Help with Using the Catalex MP3 Player

There’s another switch contact on the rotary dial to tell you the dial is in the home position doing nothing.
The dial switch does nothing while the dial is being rotated clockwise by the finger so...

Art Yesterday, 17:43

#### Re: Watchdog timer not working as expected

If you haven’t tied your MCLR pin high or disabled it, you could get an MCLR reset any time.
Same with a brownout reset. I haven’t checked this hex configuration values you gave (nobody is going to...

Art Yesterday, 17:33

#### Re: Si4702 FM Radio chip

My code in here is probably more sensible for PBP. In code examples is dirty to get most out of 16F628a.

Up to you, but that DT code link above is an otherwise lost original I think (which I...

Art Yesterday, 17:06

#### Re: Watchdog timer not working as expected

I think define should be UPPER CASE.

aerostar Yesterday, 15:33
• # Timers

### Pulse Measurement using CCP1 and DT Interrupts

by Published on - 10th March 2012 14:55  Number of Views: 2656

Grab that app note Steve linked to. It's got some pretty cool stuff in it.

This will save you a little time ...

### Timer for PBP code

by Published on - 18th August 2011 10:59  Number of Views: 4142

This allows for the timing of how long PBP code routines take to execute for the PIC18 series. ...

### Stop-Watch Timer

A Stop-Watch Timer that displays in real-time up to 100 hours with 1/100th Second resolution. It demonstrates a ...

### LAB-X1 Timer2 Clock

by Published on - 25th July 2010 06:13  Number of Views: 3839

This example shows how to create a 24-hour time clock on the LAB-X1 using Timer2/PR2 match - with buttons to increment hours, ...

### 16-Digits Elapsed Timer Using 7-Segment Displays

Number of Views: 6758

OMER YILDIZ
' June 2009 ' PIC 16F628A - 20Mhz
' This example shows how to drive 16-digits 7-Segment displays
...

### High Resolution Timer & Speed Calculator

by Published on - 6th June 2010 00:05  Number of Views: 4265

This PBP project is a high precision timer and Speed Calculator.
Its designed to be used with a 2 sensor optical gate, ...

### Olympic Timer

by Published on - 31st May 2010 17:38  Number of Views: 3065

It's almost Olympics time... so here's a topical program using PBP exclusively (no embedded Assembler) to give you a Stop-Watch ...