Hello ,
I have read this thread several times and looked at the datasheet several time as well. I am having problems with code that has worked fine in the past and suddenly I can not make GPIO.0 and GPIO.3...
Thank you for the answer! Alberto
Try changing: if tecla_dta = 1 then cnt_lixo_1 = cnt_lixo_1 + 1 : lcdout $FE, $C0,"Tcl Dta" : pause 1500 if tecla_esq = 1 then cnt_lixo_2 = cnt_lixo_2 + 1 : lcdout $FE, $C0,"Tcl Esq" : pause...
Hi everyone, I'm starting a small program with Pic 18F2550, but it doesn't work well... It should start with number 2 at Cnt_Lixo, and increment 1 every 1,5 seconds. Sometimes (one in...
Is there any special reason why one should pay 30 bucks for an LCD? Ioannis
The mobile devices cannot access the site yet. This will need some extra work by our boss. He knows and when time allows I am sure he will do it. Please be patient as all this require time and...
Thank you guys. Robert
The book is posted, linked from the header as "Interrupts". Not sure about your iPad issue.
Just two simple questions: Is the book finished? Why I cannot read it with my IPAD? Alberto
Yes. It have almost same effect as MCLR pulled low, then high. Only 2 bits are different, if I remember correctly.
DEFINE OSC 4 ;----[USART Settings]-------------------------------------------------------
Re: Input problems with 12F629?
I have read this thread several times and looked at the datasheet several time as well. I am having problems with code that has worked fine in the past and suddenly I can not make GPIO.0 and GPIO.3...
n0yox Yesterday, 23:05