Am I correct about the following also:
16mhz internal clock: Set PLLEN off - and set IRCF = 1111
8mhz internal clock: Set PLLEN off - and set IRCF = 1110
Hello all,
I've ordered a few PIC16F1825 - and I'm excited about the internal 32Mhz OSC in this chip.
I've been looking at the Datasheet and the PBP3 config file for this device - and I think I...
Richard - thank you for pointing me to that PIC!!!
I was going to ask about newer PICs with internal OSC running at higher speeds
But I hadn't even imagined one running at 32Mhz
Thank you Hendrik.
That gave me a lot to think about.
One of the examples in that thread has the pic checking for 4 possible conditions of two bits, and remembering the last condition of those two...
We had a similar discussion not that long ago, might be worth revisiting.
It's important to remember that one usually want to do more than JUST keep track of an enocder and that has to be accounted...
Published on - 27th May 2010 03:01
Number of Views: 5757
This is an effort to help users understand how the I2C command works by comparing it with SHIFTIN/SHIFTOUT. A serial EEPROM, 24FC1025 will be used in the example.
Menu
Re: 2nd Set of Eyes - with my Config settings for PIC16F1825 - running internal 32mhz
Thanks again - Richard!
dw_picbasic - 13th January 2021, 01:43Much appreciate!