I wanted to update this thread. The glitches refered to are due to the changing of portD from input to output and vice versa. When using x=portD or LATD=x the port is automatically switched between...
Thanks a lot! it was really time issue, I did not expected it to take so long to show something :) I waited about 20 seconds and LCD shows text now and led also blinks.
Just did a quick test on the demo version of PICSimulator.exe with the attached hex file. This program was built for 16F84 and the whole basic code is this:
Downloaded trial of that PIC simulator - it appears to not be working, I mean I can load hex, run it, I see instructions cycling, but no led blinking, no LCD is outputting anything....
Menu
Re: DT Interrupts not Working with PIC16F19197
my bad , missed the ticon line
richard Today, 02:51dt ints defined timer 1 like this
#define TMR1_INT PIR1,T1IF, PIE1,T1IE ;-- TMR1 alternate sym
or this
#define TMR1_INT PIR1,TMR1IF, PIE1,TMR1IE ...