Use HIL to PS/2 converter. Then send data from pic using PS/2 protocol. I think you have example on somewhere forum.
As far as I know HIL use dedicated IC for interfacing device MCU to HIL Bus.
An interesting project has come my way.... To design a bespoke keyboard outputting a few function keys and trackerball via HP-HIL to an old HP Workstation, There are 10 needed in total...
I'm working on a bootloader, based on this thread
This code require the PBP LONG option enabled as I have to write code above 64K and LONG variables are...
I see just now your reply. As I told, removing the "DEFINE RESET_ORG" statement then no problem at all.
And yes, I also discovered the # does not work and a DEC is required.
Thanks !
ok, it seems troubles are related to a wrong use of "DEFINE RESET_ORG" statement (I'm working on a bootloader code).
Without it everything works fine also with the "PBP LONG" option enabled.
Thanks
That's weird. I'm working on a large project right now, have LONGs enabled and, except for one thing*, have not noticed any such problems. Have been using DEC, BIN, HEX extensively.
Here you will find snippets of working code that will help save you time. Please help add to our collection of examples by contributing code that you have written.
Menu
Re: USB to send ASCII characters to PC
George,
Ioannis Today, 20:21I do not understand where flow control is needed.
Ioannis