• ### Recent Forum Posts

#### Re: Real time clock + external interrupt in one PIC possible?

Now you have to post a video. I want to hear those side pipes growl. :D

Demon Yesterday, 20:43

#### Re: J94's

Yeah, I sorta overengineer stuff as well. :D

Demon Yesterday, 20:41

#### Re: MCP3201 problems

Nope :) ! No change !

fratello Yesterday, 15:42

#### Re: MCP3201 problems

Just curious if the symptoms change when the RPM is varied?

AvionicsMaster1 Yesterday, 14:43

#### Re: MCP3201 problems

Thanks ....but I have already FULL decoupling...8538

fratello Yesterday, 09:10

#### Re: MCP3201 problems

Hello Fratello,

Sounds like a hardware issue. I worked with LM2931 and i had some strange problems because I used a lower capacitance on output. Connect a 100uF (0,1uF is too low) near the stab...

midali - 11th December 2017, 22:56

#### Re: how to calculate reverse value with scale

Ohhh yes yes ! I'm so tired... didn't saw as simple as it is !
Regards

harryweb - 11th December 2017, 15:31

#### Re: how to calculate reverse value with scale

or

should do it. Where I assume you are reading 130 to 30.

Thus, a reading of 130 will give output = 0
and a reading of 30 will give output = 100

richard - 11th December 2017, 02:10

#### Re: how to calculate reverse value with scale

should do it. Where I assume you are reading -130 to +30.

Thus, a reading of -130 will give output = 0
and a reading of +30 will give output = 100

Jerson - 11th December 2017, 01:59

#### how to calculate reverse value with scale

Hi,

I cannot find how to convert my level value from receiver (from -130dBm to -30dBm) I do not use minus -> so 130 to 30
My display (nextion type) has a "vu meter" witch needs 0 to 100
When...

harryweb - 10th December 2017, 23:22
• # Beginners

### [Beginner Tutorial] How to get started with PICBASIC PRO Demo, MicroCode Studio & PICKIT 2

by Published on - 26th June 2011 16:15  Number of Views: 3880

So you're new to PBP and want a simple step-by-step guide? This one will show how how to get started with
• PicBasic
...

### [Beginner Tutorial] How to get started with PICBASIC PRO Demo, MPLAB & PICKIT 2

by Published on - 23rd June 2011 21:52  Number of Views: 3992

So you're new to PBP and want a simple step-by-step guide? This one will show how how to get started with
• PICBASIC
...

### Belorussian translation

by Published on - 31st May 2011 12:18

Original Article is here: http://www.fatcow.com/edu/melabs-picbasic-be/

Translated by: Bohdan Zograf
...

### Forum Latest Posts

Number of Views: 1566

Some users like to be able to view the most recent posts on the forum. They wish to visit the forum and view the latest posts in all category's in cronological order, without having the forum hide posts that they have all ready seen.
...

### Today's Post Search or the Missing Link

by Published on - 1st May 2010 04:59  Number of Views: 1950

With all of the added benefits or the new forum, a useful feature has been lost. This is the "Today's Post" link that was found in the "Quick Links" drop down. Due to compatibility issues with future updates from vBulletin this link can not be brought back.

But there is a couple of ways to do the same thing using the same amount of mouse clicks once it is set up.
...

### Use of Microchip Trademarks and Brands – Guidelines

Published on - 23rd April 2010 19:52  Number of Views: 5571

Microchip brand identity is a valuable asset protected by trademark law. Microchip aims to protect this asset by ensuring that its trademarks are used properly by Microchip, its customers, licensees, distributors, vendors, consultants, developers and others. You may use Microchip trademarks and product names to refer to Microchip products and services as long as you follow these Guidelines.
...

### How to enter "®" , "©" and "™" symbols

Published on - 23rd April 2010 19:48  Number of Views: 2124