you have set timer1 to overflow every 16.38 mS , you never count the overflows
also adding 65535 to a word var seems very odd do you actually intend to subtract 1
Thanks for reply !
T1CON = %00000110 ; this command does not start timer1?
Or do I have to use the command: T1CON.0 = 1 'start Timer1 ?
How to see if button is released ? IF DataW.... it's...
in order to measure a buttons hold time you need to either note time button was pressed then the time button was released
the duration is release time - when pressed time, or when button is...
Howdy ! I'm back on the forum after some absence (I had some personal problems).
I am trying to develop a project. I use a PIC12F675 with which I read the value of a group of 6 resistors, of...
Re: How to measure how long I pressed a button ?
What happens if more than one button is pressed at the same time?
HenrikOlsson Today, 17:16Anyway, this might serve as starting point. It compiles but it is not tested.
Long_Press CON 5000
Short_Press con 100
cnt...