Mine arrived 30mins ago Jan 16th about 10:00 UK time, - connector pins a bit bent, although packing was good. Here it is running with the code above
https://youtu.be/52boY-4e4qc
You will only...
Thanks again - Richard!
Much appreciate!
the x4pll only works for intosc = 8mhz or suitable ext osc
with no pll intosc from datasheet :-
9004
Thank you Richard!
Much appreciate!
Am I correct about the following also:
16mhz internal clock: Set PLLEN off - and set IRCF = 1111
8mhz internal clock: Set PLLEN off - and set IRCF = 1110
config looks ok while that osccon setting will work
osccon bit 7 SPLLEN: Software PLL Enable bit
If PLLEN in Configuration Word 2 = 1: ie & _PLLEN_ON
SPLLEN bit is ignored. 4xPLL is always...
Hello all,
I've ordered a few PIC16F1825 - and I'm excited about the internal 32Mhz OSC in this chip.
I've been looking at the Datasheet and the PBP3 config file for this device - and I think I...
Richard - thank you for pointing me to that PIC!!!
I was going to ask about newer PICs with internal OSC running at higher speeds
But I hadn't even imagined one running at 32Mhz
Very sweet!!...
Thank you Hendrik.
That gave me a lot to think about.
One of the examples in that thread has the pic checking for 4 possible conditions of two bits, and remembering the last condition of those two...
Re: Anyone has any experience with HT1632C LED display drivers?
Forgot to mention the Ebay item number for anyone interested (Other suppliers are available)
aerostar Yesterday, 12:30eBay item number:
401111914275