in order to measure a buttons hold time you need to either note time button was pressed then the time button was released
the duration is release time - when pressed time, or when button is...
Howdy ! I'm back on the forum after some absence (I had some personal problems).
I am trying to develop a project. I use a PIC12F675 with which I read the value of a group of 6 resistors, of...
Published on - 27th June 2012 16:31
Number of Views: 3872
Hi All!
Here is the code to create a voltmeter and ammeter. Everyone has a "display of choice" so you can use this to drive whatever display you wish to add. The color coding of the wires is only as a reference to make construction easier. I understand from Allegro that the ACS758 can handle as much as 200 amps and 72 amps is about maximum for this code. Hope this is of use and helpful to others.
Re: How to measure how long I pressed a button ?
in order to measure a buttons hold time you need to either note time button was pressed then the time button was released
richard Today, 04:01the duration is release time - when pressed time, or when button is...