you have set timer1 to overflow every 16.38 mS , you never count the overflows
also adding 65535 to a word var seems very odd do you actually intend to subtract 1
Thanks for reply !
T1CON = %00000110 ; this command does not start timer1?
Or do I have to use the command: T1CON.0 = 1 'start Timer1 ?
How to see if button is released ? IF DataW.... it's...
in order to measure a buttons hold time you need to either note time button was pressed then the time button was released
the duration is release time - when pressed time, or when button is...
Howdy ! I'm back on the forum after some absence (I had some personal problems).
I am trying to develop a project. I use a PIC12F675 with which I read the value of a group of 6 resistors, of...
Published on - 27th June 2012 16:31
Number of Views: 3872
Hi All!
Here is the code to create a voltmeter and ammeter. Everyone has a "display of choice" so you can use this to drive whatever display you wish to add. The color coding of the wires is only as a reference to make construction easier. I understand from Allegro that the ACS758 can handle as much as 200 amps and 72 amps is about maximum for this code. Hope this is of use and helpful to others.
Re: How to measure how long I pressed a button ?
Thanks !
fratello Today, 19:10But nothing on serial ...(in Proteus 8)