Need to know the time - accurately for your next project?
The code below allows your PIC to log into a network timeserver and it (eventually) writes the time to a Dallas RTC (code not supplied).
The PIC checks the NET TIME every power-up and thereafter every 4 hours. If it doesn't make connection, it tries an alternate time server. If THAT doesn't work (after retries) it gives up and tries again 4 hours later. A Lantronix XPort handles the connection to the net.
...
Menu
Re: 16Bit 125KHz PWM with PIC12F1572
125KHz is [COLOR=#333333]only available with a pbpl compile
richard Today, 02:08from the manual hpwm section
every chip you have posted about on this subject is quite capable of that output.
your posted code...