Need to know the time - accurately for your next project?
The code below allows your PIC to log into a network timeserver and it (eventually) writes the time to a Dallas RTC (code not supplied).
The PIC checks the NET TIME every power-up and thereafter every 4 hours. If it doesn't make connection, it tries an alternate time server. If THAT doesn't work (after retries) it gives up and tries again 4 hours later. A Lantronix XPort handles the connection to the net.
...
Re: SERIN2 Receiving Wrong Data
Another thing that could be causing problems is that SEROUT2/SERIN2 are software bit-banged (no hdw UART involved),
tumbleweed Today, 13:34so device B must be sitting waiting at the SERIN2 for the first start bit before...