Need to know the time - accurately for your next project?
The code below allows your PIC to log into a network timeserver and it (eventually) writes the time to a Dallas RTC (code not supplied).
The PIC checks the NET TIME every power-up and thereafter every 4 hours. If it doesn't make connection, it tries an alternate time server. If THAT doesn't work (after retries) it gives up and tries again 4 hours later. A Lantronix XPort handles the connection to the net.
...
Menu
Re: PWPS Servo Problem
I tested the PIC12F1840 and PIC16F1824 with software serial input. PIC frequency set to 8MHz as required PBP at 9600 baud.
louislouis Today, 22:21It's working, but the response is kinda slow.
'* Notes :...