Quick and dirty candle effect with PIC12F675
by
Published on - 1st September 2011 03:30
For best results use a clear amber LED, you can embbed the LED using a tube as cast and pouring molten parafin...
Code:
'****************************************************************
'* Name : RGB12F675 *
'* Author : Ivan Rosales, Guadalajara México *
'* Notice : Copyright (c) 2011 Ivan Rosales *
'* : All Rights Reserved *
'* Date : 31/08/2011 *
'* Version : 1.0 *
'* Notes : Efecto de Vela en Pin 5 (GP2) *
'* : Utilizar preferentemente LED Ambar *
'****************************************************************
@ Device PIC12F675,WDT_ON,PWRT_ON,PROTECT_OFF,MCLR_OFF,BOD_OFF
ansel=0 'No usar ADC's las entradas serán digitales
cmcon=7 'No usar comparadores analógicos
trisio=%001011 'GP2 Será salida
DEFINE OSCCAL_1K 1 'Auto-Calibración del reloj interno
'Definiciones
Vela var GPIO.2
Luz var byte
X var byte
Ciclos con 25
'Programa
Pral:
random luz
luz=luz//(255-ciclos)
if luz<120 then luz=luz+50
for x=1 to ciclos
pwm vela, luz+x, 1
next
goto pral
end
Re: SERIN2 Receiving Wrong Data
The sending device has the typical 18F4550 USB setup and it is set to "Define OSC 48". The receiving device is set to "DEFINE OSC 16".
rsocor01 Yesterday, 19:56