Yes, the bracketed variable is the qualifier. SERIN won't receive or pass the data until it recognizes the presence of the qualifier in the received packet. For some reason, my qualifier...
one easy thing to do to troubleshoot your system....... add a temporary serout for the receiving 283 to see receptions and get all that working first as you continue with the rest of your code.... (I...
I don't really use serin so I can't be of much help, but just to educate me: isn't the contents inside the square brackets a qualifier or filter - like the WAIT modifier in serin2?
Thanks for the reply. Yes, ProgIDRx is cleared. And its value is $A (or10). But, I haven't been able to receive it yet because nothing is being received. SERIN always exits upon the 5...
two thoughts looking at your code.........
...ProgIDRx = $A............ did you CLEAR ProgIDRx after reception and might need to be ....$"A" not sure but
Published on - 13th May 2011 21:45
Number of Views: 6407
The attach zip contains a number of projects, the clock application is called "Clock_8_BIT_par_TFT.pbp" This project has a external RTC that can be set via USB with VB6.
There are a few other projects to drive this display including a SPI interface.
Disclaimer; I am not a programmer so my code may not be the most efficient.
Re: Serin Not Recognizing Qualifier From Another PIC
Hi Troy,
JESmitter Today, 00:34Here's my OSCON
OSCCON = %01100000 ' Set system clock 4MHz(1MHz internal w/x4 PLL enabled)
My SERIN SYNTAX
SERIN PrgIn,1,5000,PassProg,[ProgIDRx],IDByteRx ' Check for...