Probably yes. But it depends on how you write code. Looks great!
BAUDCON does not appear in 628 or 628a data sheet. MisterE Multicalc shows Registers RCSTA = $90 ' Enable serial port & continuous receive TXSTA = $24 ' Enable transmit, BRGH = 1 SPBRG =...
Since I've almost finished development of this clock, including hardware side, and I want to post an instructable, I want to make my code a bit tidy also. I have made several screen update routines,...
For a 4Mhz timing at 9600 baud Register settings RCSTA = $90 ' Enable serial port & continuous receive TXSTA = $20 ' Enable transmit, BRGH = 0 SPBRG = 25 ' 9600 Baud @ 0.16%...
Your serial circuit diagram/connection details would help - what is connected to the TX line ? Is it just TX that is the problem ? have you tried RXing ? Have you tried lower rates ? Do you...
Yes 4Megs Crystal
By Xtal, do you mean that an external 4Mhz crystal with two caps like 22pf?
I have ..... Still intermittent coms 🙄
Try adding DEFINE HSER_CLROERR 1
Hi All Attempting to get some serial communication working with a 16f628 (4Meg Xtal) My defines are as below :- DEFINE OSC 4 DEFINE HSER_TXSTA 24h DEFINE HSER_RCSTA 90h DEFINE HSER_BAUD...
There is no content in this section
Menu
Re: Need to drive 40 pins on variable change, is there a way to do it in elegant way?
Probably yes. But it depends on how you write code.
pedja089 Yesterday, 22:59Looks great!