I need to be able to send data via the HID so my web page can pick it up and react. The idea is the user simply plugs the device into their USB port and do nothing else.
Example I have a QR code...
It looks like FT260 may but this looks even simpler and promising what do you guys think http://www.holtek.com.tw/documents/10179/11842/HT42B564-xv110.pdf this sounds like it should be fairly easy to...
FTDI sells just about every version of USB-to-Serial and back again type converters. Peruse their web site. Another option is to get HIDmaker where you control the USB transmissions yourself. (I...
Hi, It's been a few years since I posted anything hope I'm not posting in the wrong thread. I'm working on a project where I need a small breakout board that is USB to serial and HID device. I've...
UART Receive specifically came to mind with the "flags" comment. Unload the RCREG, set a flag, then figure out what it means later. This still requires an Interrupt to clear out the RCREG so the...
It's probably good to be aware of the minimal context saving done automatically, but for the code in question it's not using any computed GOTO's so I think you should be safe with the code pretty...
Menu
Re: HT16K33 LED Controller
nice chip . very easy to use
richard Today, 04:33;7x5 led array with ht16k33 mapped columns 0-5 rows a0 - a6
;highbyte of ROW[x] maps to a0:7 i2cread/write natively sends high byte first.
;chip actually wants...