ok, it seems troubles are related to a wrong use of "DEFINE RESET_ORG" statement (I'm working on a bootloader code).
Without it everything works fine also with the "PBP LONG" option enabled.
Thanks
Perhaps you could use one of the three 1 bit outputs NumLock, CapsLock and ScrollLock to implement flow control for your hardware.
towlerg Yesterday, 10:22Thank you both. Those info are enough to get me started.
Ioannis
That's weird. I'm working on a large project right now, have LONGs enabled and, except for one thing*, have not noticed any such problems. Have been using DEC, BIN, HEX extensively.
You show a...
Do a search for USB keyboard emulator, there are a couple of threads - here is one http://www.picbasic.co.uk/forum/showthread.php?t=8291, once you get the keyboard working you can the take the data...
aerostar - 20th January 2021, 17:00Hi all,
I'm using PbP3.1 with a PIC18F device.
I need to use the LONG option in a particular program, but seems like the string-formatting modifier does not work properly.
For example
...
It can. What you're looking to do is basically implementing a USB keyboard using USB HID. When connected it will, to the PC, look like any old USB keyboard. I've managed to do it using examples on...
HenrikOlsson - 20th January 2021, 16:52Regarding USB my level is at almost zero.
I would like to make an RFiD reader and send the card serial number to a PC through USB port. Preferably not as RS232 too USB, so that the user on the PC...
No idea what was wrong, but now it works.
(It may have been the FTDI USB to serial cable.)
Re: PBP LONG and string-formatting not working ?
I see just now your reply. As I told, removing the "DEFINE RESET_ORG" statement then no problem at all.
Marcick Yesterday, 15:27And yes, I also discovered the # does not work and a DEC is required.
Thanks !