HX711_reading =$AABBCC and would be stored little-endian. I.E. if the address
of HX711_reading starts at 30h, then $CC will be stored at 30h followed by $BB at 31h followed by $AA at 32h
...
If I want to play with USB, I buy a couple PIC18F25K50's. If I want to build an ignition timing controller, I buy a couple PIC16F1619's. You seemed determined to stick with the PIC16F877A. Would...
I guess I´m blind. In the first program you had RB6 as counter input. In the second program RB6 is the start-stop button. Where did the counter input go?
Hi,
You don't have to use the 40-pin 18F45K22. You can use the 28-pin 18F25K22 with very minor changes to the code (CONFIG) or you can use another PIC - as long as it has a TMR1 & TMR2. But, if you...
wow, you are really fast! I had no time to build anything we drove another Oldtimer-rallye made Place 9 in our class and cups were down to #8, haha so no cup either.
Hello,
I've played around with the code a bit, got it up and running on my EasyPIC7 development board using a 18F45K22 device. It counts, it times, it calculates and it displays (during and after...
Menu
Re: how to use HX711 Load Cell Module
one more thing if you spend a few minutes searching the forum you will find
richard Yesterday, 06:45PutMulResult?D macro
and
GetMulResult?D macro
which enable you to do 32 bit divides with pic16's and 12's with...