the chances of AI finding well written pbp code to plagiarize from are slim at best.
afaics AI can only write code if it can plagiarize it from somewhere, the code only works if the stolen code...
It works ! Finally, the first program that shows me the duration. BUT .... the correct identification of the pressed button does not work ! I pressed ONLY button 0 : short or long ...It doesn't...
Published on - 31st May 2010 18:38
Number of Views: 5353
It's almost Olympics time... so here's a topical program using PBP exclusively (no embedded Assembler) to give you a Stop-Watch with 1/100th Second Timing (yes that's 0.01 of a Second) and gives you REAL-TIME display on your LCD. Now you can do your own timing and challenge the official time...
The program demonstrates using TMR1 in BACKGROUND (multi-tasking), uses PICBasic Interrupts, and accounts for the fact that PICBasic doesn't respond to those Interrupts immediately. There's also a set-Up CALIBRATION menu item, so you can adjust and calibrate your timer to an accuracy of 360mS per Hour.
How does it do all that? Better download the PDF and find out...
Melanie
PS. Questions and Comments post on this forum/thread. No off-list mail please.
Re: How to measure how long I pressed a button ?
i know nothing about ancient history
richard Today, 12:19and the number is word sized anyway