this can not work as you set the qualifier to 0x0d as per my example , ProgIDRx will always be 0x0d
untill you change it , serin will never change it
...
Yes, I'm aware you declare it, but you don't assign anything to it. It's there as a newly declared variable with the contents of null. So, I'm guessing serin is waiting for a null character to arrive...
This is a photo of the packet (8N1) generated by my PIC transmitter and that for some reason is not being received by my PIC receiver port GPIO.5. It's a two byte transmission $A and $61. Its in...
looks right now, ...... first post was unsure for OSCCON..... no wait !!!!! check for ... $01100001, bit 0, system clock ,,, but looks like you had it right UNLESS the configuration setting didn't...
Published on - 31st May 2010 17:38
Number of Views: 5442
It's almost Olympics time... so here's a topical program using PBP exclusively (no embedded Assembler) to give you a Stop-Watch with 1/100th Second Timing (yes that's 0.01 of a Second) and gives you REAL-TIME display on your LCD. Now you can do your own timing and challenge the official time...
The program demonstrates using TMR1 in BACKGROUND (multi-tasking), uses PICBasic Interrupts, and accounts for the fact that PICBasic doesn't respond to those Interrupts immediately. There's also a set-Up CALIBRATION menu item, so you can adjust and calibrate your timer to an accuracy of 360mS per Hour.
How does it do all that? Better download the PDF and find out...
Melanie
PS. Questions and Comments post on this forum/thread. No off-list mail please.
Re: Serin Not Recognizing Qualifier From Another PIC
Maybe all you want then is just:
rocket_troy Today, 05:03Serin PrgIn,1,5000,MainLoop, ProgIDRx
?
Troy