loop: if portb.1=0 then 'here is switch 1 of the rotary encoder counter=counter+1 goto lcd endif if portb.0=0 then 'here is switch 2 of the rotary encoder counter=counter-1 goto lcd endif goto loop lcd: lcdout $fe,$c0,dec5 counter while (portb.0=0 or portb.1=0):pause 10:wend goto loop
Common of the encoder is Low and Pull Up is supposed to be active.
Ioannis
Re: Serin Not Recognizing Qualifier From Another PIC
if using 12f683 ..... check your OSCCON ..... no PLL on 12f683 unless there is new 12f....
amgen Today, 21:089659