loop: if portb.1=0 then 'here is switch 1 of the rotary encoder counter=counter+1 goto lcd endif if portb.0=0 then 'here is switch 2 of the rotary encoder counter=counter-1 goto lcd endif goto loop lcd: lcdout $fe,$c0,dec5 counter while (portb.0=0 or portb.1=0):pause 10:wend goto loop
Common of the encoder is Low and Pull Up is supposed to be active.
Ioannis
Re: SERIN2 Receiving Wrong Data
There is probably a little bit of both. I did a search in the forum, but couldn't find anyone having the same issue.
rsocor01 Yesterday, 23:22