loop: if portb.1=0 then 'here is switch 1 of the rotary encoder counter=counter+1 goto lcd endif if portb.0=0 then 'here is switch 2 of the rotary encoder counter=counter-1 goto lcd endif goto loop lcd: lcdout $fe,$c0,dec5 counter while (portb.0=0 or portb.1=0):pause 10:wend goto loop
Common of the encoder is Low and Pull Up is supposed to be active.
Ioannis
Re: New project - MSFS C++ USB interface
So I have a need to override a pushbutton (from ON to OFF) and came up with this concept; a solenoid piggyback on a pushbutton switch with a 3D printed cap held by a strand of wire.
Demon Today, 23:21...