loop: if portb.1=0 then 'here is switch 1 of the rotary encoder counter=counter+1 goto lcd endif if portb.0=0 then 'here is switch 2 of the rotary encoder counter=counter-1 goto lcd endif goto loop lcd: lcdout $fe,$c0,dec5 counter while (portb.0=0 or portb.1=0):pause 10:wend goto loop
Common of the encoder is Low and Pull Up is supposed to be active.
Ioannis
Re: Serin Not Recognizing Qualifier From Another PIC
Hi Troy,
JESmitter Today, 00:34Here's my OSCON
OSCCON = %01100000 ' Set system clock 4MHz(1MHz internal w/x4 PLL enabled)
My SERIN SYNTAX
SERIN PrgIn,1,5000,PassProg,[ProgIDRx],IDByteRx ' Check for...