Thanks for the prompt reply.
In some ways it is a relief to know it is not the code. That is a big step forward.
As per my first post I had tried two different programmers, both...
an alternative approach could be to use a chip with timer1 gate control.
if the timer gate was connected to the injector signal and the timer read and reset at a metered rate
the count would be...
I've done some research and have found modern diesels have multiple fuel injection events such is the speed of the piezo injectors with extremes of fuel pressure to pass. Events typically...
The ECIO28P has a 4Mhz external Xtal, not a 10Mhz one.
Setting the internal clock would make it faster, no? 48Mhz?
input portB.3/pin9 (should be Pin23) is where the pulses come into the Pic...
before you go much further ;
how do you plan to get your code into the ECIO28P , it uses some sort of bootloader .
will the bootloader accept a HEX file? ,will it affect operation ? can you ditch...
|Upgrade PICBASIC PRO (PBP) 2.60 or later to PBP3 Gold Edition|
|Upgrade PICBASIC Compiler (PBC) to PBP3 Silver Edition|