On paper yes - everything should be checked.
But in real life....
As I've found out, this is more compatibility issue, rather than hardware fault.
12th gen intel processors lower their operating...
Well, isn't windows on power up, checking RAM for integrity?
If not, can you replace it with the defect one and run a RAM check utility?
Ioannis
In safe mode everything works.
Seems like this was RAM issue.
Running microcode studio for 2 days with new RAM - zero errors displayed so far.
Have you tried safe mode?
Ioannis - 15th August 2022, 19:12Yes, no changes, but my computer started showing same behavior in other apps too, even fresh installed windows. I already changed video card - nothing, changed PSU - nothing. Today I changed RAM and...
CuriousOne - 15th August 2022, 18:42Sure, we'll try our best but without seeing the code all we can do is guess and speculate which isn't very efficient and usually not very effective.
But...since Wilsons problem was that he was...
Hello,
I’m getting the same error on a 16F87 but I have 3 routines, Main, Bypass, and Alarm on a short program. I have these labels being used in if….then statements that the program is suppose to...
I've also wanted to use the modern widely available dime-o-dozen LCD's with I2C adapter boards. These things are like $6 all day long on Amazon etc.
I've been searching this forum (and others) for a...
I'm not sure posting for contract work is allowed here, but here goes. I'm familiar enough to be dangerous with PICBASIC, but would like some advanced help not for free.
I currently detect an...
Qualifying Compiler |
Upgrade Description | |
![]() |
Upgrade PICBASIC PRO (PBP) 2.60 or later to PBP3 Gold Edition | |
![]() |
|
|
![]() |
|
|
![]() |
Upgrade PICBASIC Compiler (PBC) to PBP3 Silver Edition |
Re: MicroCode studio crashes while typing in code.
Again, this has been happening to several users over the years, there are multiple threads here and over on the Melabs forum.
HenrikOlsson Today, 14:06Threads I find with a 2 minute search are from 2014, 2015, 2016, 2017...