Thanks for the prompt reply.
In some ways it is a relief to know it is not the code. That is a big step forward.
As per my first post I had tried two different programmers, both...
an alternative approach could be to use a chip with timer1 gate control.
if the timer gate was connected to the injector signal and the timer read and reset at a metered rate
the count would be...
I've done some research and have found modern diesels have multiple fuel injection events such is the speed of the piezo injectors with extremes of fuel pressure to pass. Events typically...
The ECIO28P has a 4Mhz external Xtal, not a 10Mhz one.
Setting the internal clock would make it faster, no? 48Mhz?
input portB.3/pin9 (should be Pin23) is where the pulses come into the Pic...
before you go much further ;
how do you plan to get your code into the ECIO28P , it uses some sort of bootloader .
will the bootloader accept a HEX file? ,will it affect operation ? can you ditch...
Sorry for double posting here... I just had another go at editing the pins and finding a 1602 type LCD screen code to add in the beginning of the
program. I had a look at the ECIO28P and saw...
1) I think I goofed in the title. Should be PIC18F2455
link here : http://www.microchip.com/wwwproducts/en/en010273
2) What I gave to you was the commented release of the code. It...
Welcome aboard seoullasers
The chip on the ECIO28P is a 18F2455. Found here : http://www.matrixtsl.com/webshop/28-pin-pic-18-ecio.html
I haven't looked in detail at the differences between your...
some things to consider
1. is the pbp default config suitable [there is no such thing as a pic18f2855 chip so its just a guessing game]
2. no attempt has been made to enable digital operation...
when I pgm chip with pickit2 I get this.
the problem is not the code .
|Upgrade PICBASIC PRO (PBP) 2.60 or later to PBP3 Gold Edition|
|Upgrade PICBASIC Compiler (PBC) to PBP3 Silver Edition|