Shouldn't this site be made to an HTTPS web site ?
I think some information, log-ins and passwords are more vulnerable not being HTTPS.
Thank you Jerson.
I had this error in the above routine that collects the pulse train from the receiver module.
Now works remarkably ok. No problem with the decoding. Also works fine.
...
The HCS301 is a KEELOQ encoder device and what you are possibly asking is for the decoder code.
Have you seen AN744? It gives a decoder in C. Should not be too far away from implementation in...
False alarm... Sorry.
code[index] should be code1[index] in the for-next loops.
Ioannis
I am trying to capture in an array the pulse width of a pulse train coming out of an HCS-301 chip.
The pulses are not always the same in a raw but the width should be fairly consistent as the...
Thanks, I'm only going to write to flash drive, so I'll need SERIN for just status checking, whenever drive is physically present.
CuriousOne - 23rd May 2022, 16:10Look at the SERIN2/SEROUT2 commands in the manual.
They allow you to specify optional flow control pins which you would connect to the RTS/CTS pins of the module you're using if it has hdw flow...
So I just disregard these pins and let them float?
CuriousOne - 23rd May 2022, 07:35PBP command SEROUT2 can handle flow control.
With that said I've never needed to use it with OpenLOG but it depends on how much data and at what speed you you're trying to log.
Qualifying Compiler |
Upgrade Description | |
![]() |
Upgrade PICBASIC PRO (PBP) 2.60 or later to PBP3 Gold Edition | |
![]() |
|
|
![]() |
|
|
![]() |
Upgrade PICBASIC Compiler (PBC) to PBP3 Silver Edition |
Im happy I finally signed up
You actually mentioned that well.Also visit my web site Download Idn Poker88
JessCoote Today, 12:18