I think there is no point in hunting down the incoming SMS as they are available in the GSM module.
You can once your MCU wants or is available to ask for the new messages, and select the most...
Hello there,
I've been spending some hours on searching information about using HSERIN with its interrupt, RCIF (PIR1.5), and found an interresting info in one of Bruce's posts. It wasn't about...
I'm having a go at programming a PIC24EP512GP806 bootloader with XC16. I need to define a few constants that the bootloader and application can both read.
Here's what I've got so far
const word...
FOR i = 0 to 7
Correct.0[7-i] = Mistake.0[i]
NEXT
or
Correct = Mistake REV 8
Fellas --
Is there any way to simply flip a byte so that MSB becomes LSB or vice versa?
Can't remember what the default is but I need to reverse it (or redo my *^% switches).
Thanks.
If the datasheet says it works on 3.3Volts there is no doubt that it will. Trust it.
Ioannis
3.3v seems to be working well so far. I breadboarded the pic feeding into the PI uart.
Michael - 2nd March 2021, 19:40Thanks.
My ultimate goal is to interface a 16F1847 to a Raspberry PI 3B with RS485. The PI UART though needs 3.3v but I do see that the 16F1847 will work at 3.3V ? Can anyone verify that it...
Qualifying Compiler |
Upgrade Description | |
![]() |
Upgrade PICBASIC PRO (PBP) 2.60 or later to PBP3 Gold Edition | |
![]() |
|
|
![]() |
|
|
![]() |
Upgrade PICBASIC Compiler (PBC) to PBP3 Silver Edition |
Re: Help understanding HSERIN/HSEROUT
the problem as i see it is that you are mixing up receiving a SMS message notification with receiving serial data without losing characters.
richard Today, 00:40the question really is
how can i receive serial...