From £95.00 |
Buy it Now |
Thanks !
But nothing on serial ...(in Proteus 8)
What happens if more than one button is pressed at the same time?
Anyway, this might serve as starting point. It compiles but it is not tested.
Long_Press CON 5000
Short_Press con 100
cnt...
i possibly could be enough but you never reevaluate it until the whole timing mess has long completed
richard Today, 10:49you have set timer1 to overflow every 16.38 mS , you never count the overflows
also adding 65535 to a word var seems very odd do you actually intend to subtract 1
i can't see how any of this...
No it just sets it to use external clock
9651
Thanks for reply !
T1CON = %00000110 ; this command does not start timer1?
Or do I have to use the command: T1CON.0 = 1 'start Timer1 ?
How to see if button is released ? IF DataW.... it's...
in order to measure a buttons hold time you need to either note time button was pressed then the time button was released
the duration is release time - when pressed time, or when button is...
Howdy ! I'm back on the forum after some absence (I had some personal problems).
I am trying to develop a project. I use a PIC12F675 with which I read the value of a group of 6 resistors, of...
Re: How to measure how long I pressed a button ?
forget Proteus.
Ioannis Today, 20:01Also I think Henrik forgot to add the label Exit: just before the Serout command.
Ioannis